Home
About GTO Airboats
GTO Airboat Models
Parts & Accessories
GTO Classifieds
Contact Us
  

The SPV "Alaskan" Series

From the Florida Everglades to the great white north of Canada and Alaska, we introduce the Alaskan Series Airboat!

The SPV "Alaskan" is fully adaptable to a variety of Commercial, Emergency Response, and Sporting needs. Like the PatrolMaster Series, each boat comes with your choice performance configurations.

HULL

  • One Piece Bottom Construction
  • Alaskan Style Ice Chime
  • 20' in Length
  • Beam 8'
  • High sides and Transom for Safety
  • Transom relieved 15 Degrees for Rear Wash Safety
  • All Welded Aluminum Construction Bottom and Transom Marine Alloy 5086 .190
  • Bulkhead and Sides Marine Alloy 5052 .125 Aluminum
  • Bottom Stiffeners Equally Spaced Across Bottom
  • Min. 7- 2” X 2” X ¼” T-Bar Stringers
  • Mid-Ship Cross Brace
  • Recessed Deck Area 36” Width
  • Storage Under Bow with flush mount Lockable Access with drip rail
  • Top of Deck Non-skidded for safety
  • Custom hull stripe

POLYMER

  • 3/8” Polymer Bottom
  • 1/4” Polymer on side of Hull
  • Attached with Stainless Steel Fasteners

ENGINE

  • New 454 C.I.D. / 425 H.P. GM Engine
  • New Holley 800 CFM Carburetor
  • 12 Volt 65 Amp Alternator with Dual Belt/ Pulley System
  • Electric Fuel Pump with Fuel Filter/Water Separator
  • U.S.C.G. Approved Fuel Lines
  • Electric Gear Reduction Starter
  • Certified Marine Spark Arrestor/ with Rain Cover
  • HEI Distributor
  • Heavy Duty Flywheel 

REDUCTION

  • Airboat Drive Units
  • CH-3
  • 2.38 to 1 Ratio
  • Heavy Duty Blackhawk Belt

PROPELLER

  • Adjustable pitch Composite Propeller Matched to Horse Power of Engine

  SEATING

  • Seating for five, Two Single Front Operator , Triple Seat in Rear
  • Your Choice of Color Custom Marine Vinyl Seat Cushions and Rain Covers

RIGGING

  • Steel Super Structure with 1 ¼” Engine Stand Supports
  • Steel Seat Package
  • Steel Heavy Duty Three Main Hoop Propeller Cage
  • Brush Protectors on Sides of Cage
  • Powder Coated

EQUIPMENT

  • Cable Steering Attached to Top of Rudders
  • Stainless Steel Flex Pipe 3”
  • Stainless Steel Headers
  • Stainless Steel Mufflers
  • Heavy Duty Engine Cooling Aluminum Radiator
  • Aluminum Coolant Expansion Tank
  • U.S.C.G. Approved Radiator Hoses
  • Complete Bilge System
  • Dual Batteries with Battery Boxes
  • Ignition Protected Battery Selector Switch
  • Certified 50 Gallon Aluminum Fuel Tank with Remote Fill
  • 4 Foot Air Foiled Aluminum Rudders, Foam Filled, Nylon Bushings
  • Stainless Steel Rudder Rods
  • Rudders Attached with Rod Ends
  • Assembled with Stainless Steel Fasteners
  • KC Lights Attached to Cage
  • Floor Board Courtesy Light

INSTRUMENTATION

  • Marine Standard Wiring
  • Lighted Marine Gauges
  • Labeled Marine Toggle Switches
  • Voltmeter
  • Temperature Gauge
  • Oil Pressure Gauge
  • Tachometer
  • Hour Meter
  • Fuel Gauge
  • Marine Keyed Ignition Switch
  • 1- 12 Volt Marine Power Point
  • Fuse Panel with Circuit Breakers
  • U.S.C.G. Approved Navigational Lights

TRAILER

  • Galvanized
  • Tandem Axle (3500 lbs. Per axle)
  • 2” Heavy Duty Coupler
  • Heavy Duty Tongue Jack with Wheel
  • Heavy Duty Wench
  • Easy Grease Bearings
  • Carpet Side Boards
  • D.O.T. Lights

 

Click to see additional options here

For pricing and configuration details call our sales department at (352) 401-9070!